How to Get Sticky Residue Off Metal

Sharing is caring!

How to Get Sticky Residue Off Metal

Some metal or even appliances with metal feeling surfaces will come with stickers on them. These stickers can be warnings, instructions, or just a logo, but you will want to get them off. If you try to peel it off like that, you will leave a sticky residue on the metal.

Knowing the proper way to get sticky residue off metal that was left by a sticker is easy. Using the right cleaning products will make the job super easy, and you won’t have to do too much scrubbing, which can scrape the metal.

Quick And Easy Way To Clean It Off:

A quick way to remove sticky residue from meat is to wet the area with rubbing alcohol, then let it sit for 10 minutes. Use a cloth and wipe the residue off, and it will be clean.

6 Ways To Get Sticky Residue Off Metal 

Below are the six best ways that you can use to get sticky residue off any metal surface, whether it is appliances, a metal that is outside, or even your car. Only use some of these methods on delicate surfaces because some of the chemicals you will use are strong.

OTHER HELPFUL ARTICLES TO READ
How to Make Your Shower More Serene In 10 Ways

1. Goo Gone To Get Sticky Residue Off Metal 

goo gone on countertop

Goo gone is the number one product that you can use on any surface to remove stickers, and it’s residue without putting in too much work. This product literally breaks down the particles that hole the sticky residue together, which allows you to wipe it off.

To use the goo gone, all you need to do is spray the area with the sticky residue and let it sit for a few minutes. After the few minutes are up, you can use a cloth, sponge, or paper towel and wipe the sticker residue off the metal. You will need to clean the surface off in the end to remove some of the oil that the goo gone left. Just use some regular dish soap and warm water.

 

2. How To Use heat To Get Sticky Residue Off Metal 

person holding a heat gun

Sticky residue left by glue or from a sticker sticks more when heat is applied to it, but if too much heat is applied, it can also make it less sticky and fragile, so you can literally wipe it off with a piece of cloth if you are wondering what you would use to heat this area. 

OTHER HELPFUL ARTICLES TO READ
How to Get Weed Smell Out of Car

You can use a lighter or a hair dryer and heat the sticky residue. Just hold the hair dryer a few inches away from the sticky residue for a few seconds on the max settings. Now use a microfiber cloth and run the sticky residue off the metal surface until it is all gone.

 

3. Use Rubbing Alcohol To Get It Off Metal 

Almost every household will have a bottle of rubbing alcohol lying around. This is one of the best all-round cleaning products that you can use to clean any surface without damaging it. It even works great when it comes to removing bacteria without using bleach.

To use the rubbing alcohol, all you need to do is spray or wet the area that has the sticky residue on it and let it sit for 10 minutes, then gently scrub it off with a sponge from your kitchen or a rough enough microfiber cleaning cloth.

OTHER HELPFUL ARTICLES TO READ
8 Simple Things You Forget to Clean When Cleaning Your House

 

4. Nail Polish Remover To Remove Sticky Residue Off Metal 

a person holding acetone in there hands

Nail polish remover is another great chemical that you can use to soften sticky residue from glue so that you can wipe it off easily. Nail polish remover is similar to using paint thinner, but it is less toxic. These are the same chemicals they use in nail salons to remove nail polish, so either your wife or girlfriend has some or orders it online.

To use the nail polish remover, all you need to do is wet a part of the cloth with a generous amount of nail polish remover and wipe the sticky residue off the wall, and you are done. It is that simple to clean it off with it.

 

5. Hydrogen Peroxide To Clean Stick Residue Off Metal 

Hydrogen peroxide is a great cleaning product that you can also use to soften and remove sticky residue off any surface, including metal. Use hydrogen peroxide all you need to do is wet a cloth or a sponge and where is surface of the sticky residue. Then let it sit for 5 to 10 minutes, then you can wipe it off, and it will come off easily.

OTHER HELPFUL ARTICLES TO READ
How to Remove Wine Labels

 

6. Using WD-40 To Remove Sticky Residue

WD-40 has the same consistency of goo gone, and it works similarly to it. When using the wd-40, all you need to do is wet the area with the sticky residue and let it sit for 5-10 minutes so that it can loosen the sticky residue. Once the time is up, use a wet microfiber cloth and wipe the sticky residue off the metal. The WD-40 will leave a slight smell, so you will need to clean off the area with some clean water and dish soap to remove the grease marks and smell.

 

Also Read:

How to get sticker residue off laptops

How to make glue dry faster

How to remove glue from mirror

How to get sticker residue off clothes

How to get a sticker off a mirror 

Final Thoughts:

Removing sticky residue from metal that you see often can make a huge difference. The methods above are very versatile and can be used on most surfaces, including your furniture, appliances, and even your car. When using these methods, use the less extreme one on delicate surfaces like your car or appliances.

OTHER HELPFUL ARTICLES TO READ
5 Simple Ways to Get Rid Of Vinegar Smell

Sharing is caring!